Product Manual

HOLD LEFT and HOLD RIGHT function:

Pressing either the HOLD LEFT or the HOLD RIGHT buttons will:

• Exit the measuring mode

• Calculate the proper bevel angle and miter angle for your saw

• Hold that reading

• Show a graphic representation of the cutting orientation for the trim

Note: you can press either of these buttons as many times as you want to switch the

graphic from the left piece to the right piece. You can move the protractor arms to any

position without losing the values. These values are held until you return to the

measuring mode.

15. Press to toggle between DUAL BEVEL and BEVEL LEFT

16. Press the HOLD LEFT button to calculate the

miter and bevel angles to set your saw for

cutting the trim. A graphic illustration of how

to place the left piece of trim on your saw is

shown.

17. Press the HOLD RIGHT button to calculate

the miter and bevel angles to set your saw

for cutting the trim. A graphic illustration of

how to place the right piece of trim on your

saw is shown.

18. Press and hold both the HOLD

LEFT and HOLD RIGHT buttons to

return to the measuring mode.