User manual

WT-2232 32 Channel GSM VOIP Gateway

WT-2232 – USER MANUAL – Rev1.0 – Technical Support: technical@witura.com

4.2.11 Remote Management

4.2.12 User Management

4.2.13 System Setting

WT-2232 32 Channel GSM VOIP Gateway

WT-2232 – USER MANUAL –

Rev1.0

–

Technical Support: technical@witura.com

2.2.1 Power indicator: Light up when SIP power is normal.

2.2.2 10M/100M: an link indicator light of LAN

2.2.3 10M/100M: a link indicator light of WAN

2.2.4 WAN: RJ-45 internet socket, connect to router or HUB, use for

communication

2.2.5 LAN: RJ-45 internet socket, connect to network card of PC, use for

configuration.

2.2.6 RS232: use for programming and debug

2.2.7 Antenna connector

2.2.8 LED1 (power indicator): Light up when GSM power is normal.

2.2.9 LED2 (signal indicator): Flash for searching network or get signal.

2.2.10 LED5 (working indicator): Light up when GSM is ready.

2.2.11 LED6 (use indicator): Light up when in use or off-hook.

2.3 Function

WT-2232 GSM VoIP Gateway is wireless equipment which base on wireless

module M10, it communicate clearly and has no noise, with insider backup

battery and is convenient and durable.

2.3.1 Web setting and management.

2.3.2 Incoming calls display and Caller ID hiding programmable

2.3.3 Polarity reversal support.

2.3.4 for call termination (VoIP to GSM) and origination (GSM to VoIP)

2.3.5 PDD dialing control, USSD, SMS send and receive (option).

2.3.6 Following me functions, LCR (Least cost route).

2.3. 7 Prefix code programmable

2.3.8 For HTG-4000, its 16 channels, each channel with 4SIM slot，each SIM

can be rotated by time

2.3.9 IMEI change unlimited.