User manual

WT
-
101
0
C2
USER MANUAL
Inputs and Outputs Wiring Diagram
Note: Installing the SIM Card. Please be sure the initial 4 digit PIN code of SIM card
is disabled. This can be done by placing it in an unlocked Mobile phone and first
checking if the SIM requested any PIN code. If this is the case the PIN code can be
disabled using the security settings on the phone.
Proceed as follows:
1. Slide back the SIM door and lift it up
2. Slide the SIM card into the SIM door making sure that the clipped corner of
the SIM card lines up with the clipped corner of the SIM holder
3. Close the SIM door
4. Slide the SIM door to lock the SIM card in place
When power up the WT 1010C2, it will display as below
LOADING:>>>>>
WAITING…
3.4
)
Power u
p
the WT-1010C2
3.3) Installing the SIM Card
9
WT1010C2 – USER MANUAL – Rev.2.7 – Technical Support : [e-mail]
COPYRIGHT ©2008 WITURA CORPORATION SDN BHD