User manual

101

USER MANUAL

2. Main Features of the WT-1010C2

1. Panel compatibility - Allows any contact ID alarm panel to transmit alarms

over GSM using the GSM voice channel

2. Works over the GSM cell phone networks Units can be used wherever there is

cell phone coverage

3. Telephone line backup: WT-1010C2 give priority to the lowest cost network.

WT-1010C2 uses the telephone line as the main transmission line and uses

the GSM voice channel as backup

4. The WT-1010C2 unit can continuously watches if a Contact ID is directed

towards the security monitoring station through the wired or GSM network,

and if either of the preset report codes is noticed, it sends an appropriate

SMS message with definable text to a mobile phone numbers. Using this

function, the owner can get instant SMS messages not only of alarms but also

every event of closing/opening.

5. Auto restart system: It can continuously monitor the system status of its own.

When there is a problem with the SIM card or the module is not working

properly, it will automatically restart the system.

6. Programmable Account Number: The WT-1010C2 has built-in alarm inputs

that allow the unit to send additional signals (with user programmable

Account number) to the monitoring station. The Alarm Events that available in

this system are PSTN Failure, AC Failure and Auto Test. Supported Protocol:

Pager message (DTMF with handshake)

WT1010C2 – USER MANUAL – Rev.2.7 – Technical Support : Technical@witura.com