User manual

101

USER MANUAL

5.17.3 Checking Signal Strength

To check the signal strength of the unit, you can send the following SMS command to

the unit.

Text Command:

*CSQ?#

5.17.4 Inquire Time Status

To check the time status, you can send the following SMS command to the unit.

Text Command:

*ASTM#

5.17.5 Sound the Audible Alarm manually

It is possible to sound the alarm manually by sending the following SMS command to

the unit, which remain active for the period of time set.

Text Command:

*ALNF#X

X stands for ON (1) or OFF (0) value

When *ALNF#1 is applied, means audible alarm will sound.

When *ALNF#0 (Default) is applied, means audible alarm will turn off.

5.17.6 Emergency Dialing the Programmable Administrator/Central

Station numbers

The system has the function of dialing the programmable administrator/central station

numbers immediately when the below SMS command is issued.

Text Command:

*DIAL#

WT1010C2 – USER MANUAL – Rev.2.7 – Technical Support : Technical@witura.com