User manual

101

USER MANUAL

When *PSC?#1 is applied, it will dial the administrator/central station number when

PSTN failed.

When *PSC?#0 (Default) is applied, it will not dial the administrator/central station

number when PSTN failed.

To enable this function, you would send *PSC?#1 SMS command to the unit.

Return Message

PSC-ON

5.7.2 Enable/Disable the Function of Sending Alert Message when PSTN Failed

The system has the function to send alert message to the user in the event of PSTN

unavailable. It is possible to enable or disable this function by sending the following

SMS command to the unit.

Text Command:

*PSTN#X

X stands for ON (1) or OFF (0) value

When *PSTN#1 (Default) is applied, means it will send an alert message when PSTN

failed.

When *PSTN#0 is applied, means it will not send an alert message when PSTN failed.

To enable this function, you would send *PSTN#1 SMS command to the unit.

Return Message

PSTN-ON

5.7.3 Auxiliary PSTN Fail Output Facility via PIN15

In additional to the alarm and text alert on PSTN fail the system also has a second

permanent +V output continuously via PIN15 output of the unit which will remain

available for the period of PSTN unavailable. To turn On/Off this function, you can send

the following SMS command to the unit.

Text Command:

*PSOF#X

X stands for ON (1) or OFF (0) value

WT1010C2 – USER MANUAL – Rev.2.7 – Technical Support : Technical@witura.com