User manual

101

USER MANUAL

5.4 Turn Off the feature of Password Request when Accessing the System

By default every time calling the system, it will prompt you to input a login password

to gain access to the system. To turn off this feature, you can send the following SMS

command to the unit.

Text Command:

*PWOF#X

X stands for ON (1) or OFF (0) value

When *PWOF#1 (Default) is applied, you can access the system with a login

password to program administrator number or changing the login password.

When *PWOF#0 is applied, this feature will be turned off and the system will not

accept any call.

Example:

To turn off the feature of password request, you would send the following SMS

message to the unit.

*PWOF#0

Return Message

SETTING-OFF

Note: You will need to enable the Password Login feature for the wireless listening

function.

5.5 Setting the Account Number for Event Reporting

When PSTN failure, AC failure or Auto Test, the WT-1010C2 will dial the programmable

central station number and transmit the account number along with Contact-ID to the

central station.

Text Command:

*ACCT#XXXX…

XXXX… stands for Account Number (Can be set up to 50 digits)

Example:

To set an account number 9999 into the system, you would send the following SMS

message to the unit.

WT1010C2 – USER MANUAL – Rev.2.7 – Technical Support : Technical@witura.com