User manual

WT
-
101
0
C2
USER MANUAL
Text Command:
*ANY?#X
X stands for ON (1) or OFF (0) value
When *ANY?#1 is applied, means only administrator can access the system
When *ANY?#0 (Default) is applied, means any person can access the system
To activate this function, you would send *ANY?#1 SMS command to the unit.
Return Message
ANY-ON
To set the time, you can send the following SMS command to the unit. The time is
entered in 24 Hour format.
Text Command:
*SETM#HH:MM:SS
HH stands for 2 digits value: Hour
MM stands for 2 digits value: Minute
SS stands for 2 digits value: Seconds
Example:
When *SETM#08:30:15 is applied, the time 08:30:15 will be displayed on the
LCD screen.
08:30:15
WT-1010
5.3 Time Setting
Return Message
SETM-OK
Note: Time setting is necessary for Auto Test Function at No. 9) “Auto Test”
Settings (Page)
27
WT1010C2 – USER MANUAL – Rev.2.7 – Technical Support : [e-mail]
COPYRIGHT ©2008 WITURA CORPORATION SDN BHD