User manual

WT
-
101
0
C2
USER MANUAL
PST: ME: 1 OU: 1 AL: 1
CA: 1 OK
Note: “ME” stands for generation of SMS when PSTN failed
“OU” stands for generation of pulse (+V) when PSTN failed
“AL” stands for sounding the audible alarm when PSTN failed
“CA” stands for calling the administrators when PSTN failed
Value: ON (1) or OFF (0)
17)
“AC Failure” Setting
To do this setting, you can press *31* to proceed.
ADC: ME: AL: CA:
ADC: ME: 1 AL: 1 CA: 1
Example: Setting the unit to generate an Alert Message, call the administrators,
generate a pulse (+V) and sound the audible alarm when PSTN failed.
Simply input 111#
ADC: ME: 1 AL: 1 CA: 1
OK
Note: “ME” stands for generation of SMS when PSTN failed
“OU” stands for generation of pulse (+V) when PSTN failed
“AL” stands for sounding the audible alarm when PSTN failed
“CA” stands for calling the administrators when PSTN failed
Value: ON (1) or OFF (0)
18)
Turn on the function of Inputs
To turn on the function of input number 1, you can press *24* to proceed.
20
WT1010C2 – USER MANUAL – Rev.2.7 – Technical Support : [e-mail]
COPYRIGHT ©2008 WITURA CORPORATION SDN BHD