User manual

101

USER MANUAL

TEL: OK

Number programmed successfully

You may continue to program administrator number 2, 3, 4, 5, 6, 7 and 8 by

pressing *2* , *3* , *4* , *5* , *6* , *7* or *8*

Warning: The administrator number must be program into the WT-1010 unit in order to

use SMS programming mode.

Deleting the Administrator/Central Station Number

Example: To delete the programmed administrator number 1, you can press *1*

to proceed.

TEL:

Simply press # to delete

DEL1:

Setting the Access Control for Administrator

Note: It is advised that the owner should set the system to allow

programming access for administrators only after programmed the

Administrator numbers.

To set the access control for administrator, you can press *11* to proceed.

ANY – ON&OFF:

WT1010C2 – USER MANUAL – Rev.2.7 – Technical Support : Technical@witura.com