User manual

6
WT-1010C2 USER MANUAL
WT-1010C2 – USER MANUAL – Rev.3.9 – Technical Support: [e-mail]
COPYRIGHT ©2011
WITURA CORPORATION SDN BHD
1. Panel compatibility - Allows any contact ID alarm panel to transmit alarms over GSM
using the GSM voice channel
2. Works over the GSM cell phone networks Units can be used wherever there is cell
phone coverage
3. Telephone line backup: WT-1010C2 give priority to the lowest cost network. WT-
1010C2 uses the telephone line as the main transmission line and uses the GSM
voice channel as backup
4. Auto restart system: It can continuously monitor the system status of its own. When
there is a problem with the SIM card or the module is not working properly, it will
automatically restart the system.
5. Programmable Account Number: The WT-1010C2 has built-in alarm inputs that
allow the unit to send additional signals (with user programmable Account number)
to the monitoring station. The Alarm Events that available in this system are PSTN
Failure, AC Failure and Auto Test. Supported Protocol: Pager message (DTMF
with handshake)
6. Sends text messages to user programmable cell phone number (SMS): The WT-
1010C2 can be programmed to send a SMS to a programmable cell phone number
to notify the user that the PSTN line has been cut off or unavailable.
3. Main Features of the WT-1010C2