User manual

41
WT-1010C2 USER MANUAL
WT-1010C2 – USER MANUAL – Rev.3.9 – Technical Support: [e-mail]
COPYRIGHT ©2011
WITURA CORPORATION SDN BHD
Example of Return Message
CSQ=<28>
To check the current time, you can send the following SMS command to the unit.
Text Command:
*ASTM#
Example of Return Message
TIME-01:35:50
It is possible to change the login password by sending the following SMS command.
Text Command:
*PAWO#XXXXXX
XXXXXX stands for 6 digits New Password
Example:
To change the password to 654321, you would send the following SMS command to the
unit.
*PAWO#654321
Return Message:
PAWO-OK
To reset the unit, you can send the following command by SMS to the unit.
Text Command:
*REST#XXXXXX
XXXXXX stands for 6 digits password based on *PAWO# (Default: 123456) and it can
be changed anytime.
7.18 Changing the Programming Mode Password via SMS
7.19 Reset the WT-1010C2 unit via SMS
7.17 Checking the Current Time Status via SMS