User manual

39
WT-1010C2 USER MANUAL
WT-1010C2 – USER MANUAL – Rev.3.9 – Technical Support: [e-mail]
COPYRIGHT ©2011
WITURA CORPORATION SDN BHD
This function is useful when the WT-1010C2 is connected to the PABX system where
Access Digits are required for Extension Line/Centrex Line. To set the unit to ignore the
front dialing digits, you can press *44* to proceed.
Example: To set the unit to ignore first 2 dialing digits
Simply press 2#
Note: The value is 0 – 4 (Default: 0)
To adjust the speaker and microphone volume level, you can press *11* to proceed.
Example: To adjust the speaker volume to 3 and microphone volume to 3
Simply press 33#
DEL-NUM:
DEL-NUM: 2
DEL-NUM: 2
OK
SPK: MIC:
SPK: 3 MIC: 3
SP
K
: 3 MIC: 3
OK
7.12 Setting the WT-1010C2 to ignore the front dialing digits when dialing the
Administrator via Voice
7.13 Adjusting the Speaker and Microphone Volume level via Voice