User manual

WT-1010C2 USER MANUAL

WT-1010C2

–

USER MANUAL –

Rev.3.9

–

Technical Support: Technical@witura.com

WITURA CORPORATION SDN BHD

To activate output relay 1 to stay on for a specific time, you can press *21* to proceed.

Example: To activate relay 1 to stay on for 50 seconds and with SMS

reply from the unit after relay has turned off

Simply input 000501#

Note: “ RE:” stands for generation of SMS when relay off, value: ON (1) or OFF (0)

You may continue to activate relay 2 or relay 3 by pressing *22* or *23*

To set the alarm time for audible alarm, you can press *33* to proceed.

Example: To set the audible alarm to sound for 1 hour when triggered

Simply press 03600#

Note: The alarm time must enter in 5 digits range from 00001 – 99999 (Default: 00010 seconds)

RLY1: RE:

RLY1: 00050 RE: 1

ALARM:

ALARM: 03600

7.10 Activate Output Relay to stay on for a specific time via Voice

7.11 Setting the Alarm Time for Audible Alarm via Voice