User manual

33
WT-1010C2 USER MANUAL
WT-1010C2 – USER MANUAL – Rev.3.9 – Technical Support: [e-mail]
COPYRIGHT ©2011
WITURA CORPORATION SDN BHD
It is possible to arm and disarm the system by SMS. You can send the following text
command to unit.
Text Command:
*DARM#X
X stands for ON (1) or OFF (0) value
Example:
To arm the system, you can send the following text message to the unit.
*DARM#1
Return Message
ARM
To disarm the system, you can send the following text message to the unit.
*DARM#0
Return Message
DISARM
6.7 Arm and Disarm the System (Via SMS)