User manual

30
WT-1010C2 USER MANUAL
WT-1010C2 – USER MANUAL – Rev.3.9 – Technical Support: [e-mail]
COPYRIGHT ©2011
WITURA CORPORATION SDN BHD
XXXX stands for Account Number (Can be set up to 50 digits)
Example:
To set an account number 9999 into the system, you would send the following SMS
message to the unit.
*ACCT#9999
Return Message
ATACC:9999
Note: For Contact-ID Protocol details please refer to www.smartelectron.ru/files/DC-05_
Contact_ID.pdf
The message contents can be edited and programmed up to 50 characters. You can
change the displayed text by sending the following commands by SMS message to the
unit.
Note: Only support normal abc/ABC English text, no special characters.
Text Command:
*TSMS#XXXXXX…
XXXXXX… stands for message contents
Example:
If you want the SMS Report to display “Status:Online”, you would send the following
SMS message to the unit.
*TSMS#Status:Online
Return Message
TSMS=Status:Online
The Input Alert Message can be edited and programmed up to 50 characters. You can
change the displayed text by sending the following commands by SMS message to the
unit.
Note: Only support normal abc/ABC English text, no special characters.
Text Command:
*USE[N]#XXXXXX…
6.4 Editing the Inputs Alert Messages (When High Pulse)
6.3 Editing the Message Contents of Auto Test (Up to 50 Characters)