User manual

3
WT-1010C2 USER MANUAL
WT-1010C2 – USER MANUAL – Rev.3.9 – Technical Support: [e-mail]
COPYRIGHT ©2011
WITURA CORPORATION SDN BHD
Step 12.3 Enable/Disable the Function of Activate Output Relay 2 when GSM Tower
Failure………………………………………………………………………………………………………………………25
Step 12.4 Setting the Parameter for GSM Tower Failure………………………………………………………25
Step13- Input Settings………………………………………………………………………………………………………………………………26
Step14- Arm and Disarm the System (via Fixed Line Phone)…………………………………………………………………27
Step15- Setting the Automatic Call Answering Feature…………………………………………………………………………28
6. WT-1010C2 Programming Instructions (Via SMS)……………………………………………………………………………………………29
6.1 Time Setting………………………………………………………………………………………………………………………………………………29
6.2 Setting the Account Number for Event Reporting…………………………………………………………………………………….29
6.3 Editing the Message Contents of Auto Test………………………………………………………………………………………………30
6.4 Editing the Input Alert Messages (When High Pulse)……………………………………………………………………………30
6.5 Editing the Input Alert Messages (When No Pulse)………………………………………………………………………………….31
6.6 Output Settings…………………………………………………………………………………………………………………………………………31
6.6.1 Activate Output Relay to Stay On for a Specific Time………………………………………………………………31
6.6.2 Activate Output Relay to Stay On Indefinitely………………………………………………………………………………..32
6.7 Arm and Disarm the System (Via SMS)……………………………………………………………………………………………………33
7. Miscellaneous Settings………………………………………………………………………………………………………………………………………34
7.1 Inquire all Programmed Administrator via Voice…………………………………………………………………………………………34
7.2 Deleting the Administrator Number via Voice………………………………………………………………………………34
7.3 Changing the Programming Mode Password via Voice………………………………………………………………………34
7.4 Inquire the Status of the Recipients that will receive alert messages via Voice………………………………………35
7.5 Checking the Signal Strength via Voice…………………………………………………………………………………………………35
7.6 Setting the Waiting Time for Engaged Call via Voice………………………………………………………………………35
7.7 Setting Arm Delay Time (Input 1 only)……………………………………………………………………………………………………36
7.8 Enable/Disable System Power Up SMS Notification ……………………………………………………………………………….37
7.9 Enable/Disable System Armed SMS Notification ……………………………………………………………………………37
7.10 Activate Output Relay to Stay On for a Specific Time via Voice………………………………………………………….38
7.11 Setting the Alarm Time for Audible Alarm via Voice……………………………………………………………………………….38
7.12 Setting the WT-1010C2 to Ignore the Front Digits When Dialing the Administrator via
Voice……………………………………………………………………………………………………………………………………………………………………39
7.13 Adjusting the Speaker and Microphone Volume via Voice……………………………………………………………………39
7.14 Inquire the Software and Hardware Version of WT-1010C2 via voice………………………………………………40
7.15 Inquire All Programmed Administrator Number via SMS………………………………………………………………………40
7.16 Checking the Signal Strength via SMS………………………………………………………………………………………………40
7.17 Checking the Current Time Status via SMS……………………………………………………………………………………………41
7.18 Changing the Programming Mode Password via SMS …………………………………………………………………………41
7.19 Reset the WT-1010C2 Unit via SMS………………………………………………………………………………………………………41
7.20 Inquire the Status of Inputs, PSTN and AC……………………………………………………………………………………………42
8. Technical Specifications………………………………………………………………………………………………………………………………………42