User manual

25
WT-1010C2 USER MANUAL
WT-1010C2 – USER MANUAL – Rev.3.9 – Technical Support: [e-mail]
COPYRIGHT ©2011
WITURA CORPORATION SDN BHD
Example: To set the network failure time for 5 seconds
and the turn on time of Relay 1 for 5 seconds
Simply press 0505#
Description:
“NETDT1” stands for network failure time range from 00 – 59 seconds. Default: 6
seconds.
“RLY1” stands for turn on time of Relay 1 when network fails (00 – 59 seconds), 00
means RLY1 will stay ON permanently.
Step 12.3 Enable/Disable the function of Activate Output Relay 2 when GSM
Tower Failure
To turn on this function, you can press *40* to proceed.
To turn on this function simply press 1#
To turn off this function simply press 0#
Step 12.4 Setting the Parameter for GSM Tower Failure
To set the parameter, you can press *41* to proceed.
NETDT1: 05 RLY1: 05
NETDT1: 05 RLY1: 05
OK
NO SIGNAL
ON&&OFF:
NO SIGNAL
ON&&OFF: 1
NO SIGNAL
ON&&OFF: 1 OK