User manual

24
WT-1010C2 USER MANUAL
WT-1010C2 – USER MANUAL – Rev.3.9 – Technical Support: [e-mail]
COPYRIGHT ©2011
WITURA CORPORATION SDN BHD
Note: Power Down Output facility can be used on alarm panel for alert notification
Step 12.1 Enable/Disable the function of Activate Output Relay 1 when GSM
Jammers is detected
To turn on this function, you can press *38* to proceed.
To turn on this function simply press 1#
To turn off this function simply press 0#
Step 12.2 Setting the Parameter for Network Failure
To set the parameter, you can press *39* to proceed.
NETWOR
K
ON&&OFF:
NETWORK
ON&&OFF: 1
NETWORK
ON&&OFF: 1 OK
NETDT1: RLY1:
Step 12. Setting for Overcoming GSM Jammers & GSM Tower Failure