User manual

20
WT-1010C2 USER MANUAL
WT-1010C2 – USER MANUAL – Rev.3.9 – Technical Support: [e-mail]
COPYRIGHT ©2011
WITURA CORPORATION SDN BHD
Note: Skip this setting if only 1 time section is needed.
Step 9.5 Enable/Disable the function of dialing the programmed Administrator
number for Auto Test
To turn on this function, you can press *27* to proceed.
To turn on this function simply press 1#
To turn off this function simply press 0#
Default Value: 0
Step 9.6 Enable/Disable the generation of SMS Report for Auto Test
To turn on this function, you can press *28* to proceed.
To turn on this function simply press 1#
To turn off this function simply press 0#
Default Value: 0
DTIMEC
ON&&OFF:
DTIMEC
ON&&OFF: 1
DTIMEC
ON&&OFF: 1 OK
DTIMEM
ON&&OFF:
DTIMEM
ON&&OFF: 1
DTIMEM
ON&&OFF: 1 OK