User manual

19
WT-1010C2 USER MANUAL
WT-1010C2 – USER MANUAL – Rev.3.9 – Technical Support: [e-mail]
COPYRIGHT ©2011
WITURA CORPORATION SDN BHD
Step 9.3 Setting the Auto Test Report Time Section 2
The system has the function of sending the test report to the Administrator at the
programmable time section. The time is entered in 24 Hour format. To program
the auto test report time section 2, you can press *42* to proceed.
Example: To set the auto test report time at 18.00pm
Simply input digits and ended with #
Note: Skip this setting if only 1 time section is needed.
Step 9.4 Setting the Auto Test Report Time Section 3
The system has the function of sending the test report to the Administrator at the
programmable time section. The time is entered in 24 Hour format. To program
the auto test report time section 3, you can press *43* to proceed.
Example: To set the auto test report time at 23.59 pm
Simply input digits and ended with #
DSTM2:
: :
DSTM2:
18 : 00 : 00
DSTM2:
18 : 00 : 00 OK
DSTM3:
: :
DSTM3:
23 : 59 : 00
DSTM3:
23 : 59 : 00 OK