User manual

18
WT-1010C2 USER MANUAL
WT-1010C2 – USER MANUAL – Rev.3.9 – Technical Support: [e-mail]
COPYRIGHT ©2011
WITURA CORPORATION SDN BHD
Step 9.1 Time Setting
To setup time, you can press *16* to proceed.
Example: To set the time at 8.30am
Simply input digits and ended with #
Step 9.2 Setting the Auto Test Report Time Section 1
The system has the function of sending the test report to the central station at
the programmable time section. The time is entered in 24 Hour format. To
program the auto test report time section 1, you can press *17* to proceed.
Example: To set the auto test report time at 12.00pm
Simply input digits and ended with #
TIME:
: :
TIME:
08 : 30 : 00
TIME:
08 : 30 : 00 OK
DSTM1:
: :
DSTM1:
12 : 00 : 00
DSTM1:
12 : 00 : 00 OK
Step 9. Setting for Auto Test