User manual

WT-1010C2 USER MANUAL

WT-1010C2

–

USER MANUAL –

Rev.3.9

–

Technical Support: Technical@witura.com

WITURA CORPORATION SDN BHD

To set the delay time, you can press *34* to proceed.

Example: To set the required delay time at 7 seconds

Simply press 07#

Note: The Delay Time is a 5 digits value range from 00 – 59 seconds (Default: 04 seconds)

To program the unit to dial a certain group of numbers for PSTN/AC failure or Auto Test,

you can press *29* to proceed.

Example: Setting the unit to dial the first 5 administrator

Simply press 5#

DTTRANSMIT:

07 OK

CALL:

CALL: 5

Step 7. Setting the Delay Time for Transmitting a Dialing Number

Step 8. Setting for Calling a Group of Administrator