User manual

16
WT-1010C2 USER MANUAL
WT-1010C2 – USER MANUAL – Rev.3.9 – Technical Support: [e-mail]
COPYRIGHT ©2011
WITURA CORPORATION SDN BHD
To program area code, you can press *9* to proceed.
Enter area code 03 for example and ended with #
Area code has programmed successfully
Note: It is possible to program up to 4 digits
To turn on/off this function, you can press *14* to proceed.
To turn on this function simply press 1#
To turn off this function simply press 0#
Default Value: 0
NEW AREA:
NEW AREA: 03
NEW AREA: 03
OK
AREA
ON&&OFF:
AREA
ON&&OFF: 1
AREA
ON&&OFF: 1 OK
Step 5. Programming the Area Code
Step 6. Setting the Function of Adding Area Code when Transmitting an Alarm