User manual

15
WT-1010C2 USER MANUAL
WT-1010C2 – USER MANUAL – Rev.3.9 – Technical Support: [e-mail]
COPYRIGHT ©2011
WITURA CORPORATION SDN BHD
Enter administrator number 13232353646 for example and ended with #
Number has programmed successfully
You may continue to program administrator number 2, 3, 4, 5, 6, 7 and 8 by pressing
*2* , *3* , *4* , *5* , *6* , *7* , *8*
The unit can send text alerts to 1 or all 8 of the programmed administrator’s numbers.
To do this setting, you can press *18* to proceed.
Example: To turn on this function for all recipients
Simply input 11111111#
Note: The input for this setting is an 8 digits value: ON (1) or OFF (0) only. Each of them
represents administrator 1 – 8. Default Value: 10000000
TEL: [phone]
1#
TEL: OK
SECT:
SECT: 11111111
SECT: 11111111
OK
Step 4. Setting the Recipient that will receive Alert Messages