User manual

14
WT-1010C2 USER MANUAL
WT-1010C2 – USER MANUAL – Rev.3.9 – Technical Support: [e-mail]
COPYRIGHT ©2011
WITURA CORPORATION SDN BHD
Password entered correctly
Programming Mode
To reset the unit, you can press *15* to proceed.
Then press 1# to reset
Note: It is advised that you should reset the WT-1010C2 unit before proceeding to the below
programming section
Continue pressing *1* to start programming the administrator number 1
ENTER OK
SETTING…
HAND
FREE…
REST
ON&OFF:
REST
ON&OFF: 1
REST
ON&OFF: 1 OK
TEL:
1#
Step 2. Reset the WT-1010C2 Unit
Step 3. Programming the Administrator