User manual

10
WT-1010C2 USER MANUAL
WT-1010C2 – USER MANUAL – Rev.3.9 – Technical Support: [e-mail]
COPYRIGHT ©2011
WITURA CORPORATION SDN BHD
RLY1 (OUT1), RLY2 (OUT2), RLY3 (OUT3) Remote Controlling Outputs
These open collector outputs can be turned on and off remotely through a SMS. Remote
control will be reachable by sending a SMS with a certain command.
Note: When sending normal SMS with command below, the WT-1010C2 will
turn On / Off the output relay and reply a message of output has turned On /
Off to a programmable phone numbers.
ZONE1 (IN1), ZONE2 (IN2), ZONE3 (IN3) Inputs
Connect ZONE1, ZONE2 and ZONE3 to inputs panel, when there is a short-circuit
impulse on (ZONE1, ZONE2, ZONE3), the WT1010C2 is possible to send SMS to a
programmable phone numbers.
For Example: ZONE3 is connected to an electrical door, when there is intruder or the
electrical door is opened illegally, WT1010C2 will receive short-circuit impulse on ZONE3
and will automatically send a signal to the monitoring station and also send a SMS to
notify the owner.
4.5 WT-1010C2 Inputs and Outputs Wiring Instructions