User`s manual
WT-1018 GSM Fixed Wireless Terminal___________________________________
4
WT-1018 – User Manual – Rev.1.2 – Technical Support: technical@witura.com - www.witura.com
COPYRIGHT ©2007 WITURA CORPORATION SDN BHD
Sketch of the Fixed Wireless Terminal
The WT-1018 Fixed Wireless Terminal
Frontal view
LED indicators
LED1 - Power indicator (it’s lit while power source is connected correctly)
LED1 - Signal indicator (Flashing once in one second indicates that the terminal is on GSM network.
Being lit for a long time indicates that the terminal has failed to login onto GSM network)
Back view
1) Antenna port: Connect the antenna to the terminal
2) TEL 1: Connecting to Telephone
3) TEL 2: Connect to PSTN Line
4) On/Off switch: Turn On/Off the terminal
5) Power port: Make the flat side of power adapter plug be upturned and push it in
6) Data port: Connect the RS232 (9-pin) cable to the terminal for GPRS functions (Optional)
Power Indicator
Network Indicator