User manual

WT-248 GSM 8 Ports Analog Gateway

WT-248 – USER MANUAL – Rev.1.5 – Technical Support: technical@witura.com

4. Speed Dial Setting

• *5X#: Indicate the delay time (seconds) for speed dial. X=1-8.

Example:

*52# means auto dial number after 2 seconds dialing destination no.

*55# means auto dial number after 5 seconds dialing destination no.

5. Setting for Factory Default: **000#

• Default Setting for SPK is 2

• Default Setting for MIC is 2

• Default Setting for SIM Card is using SIM Card No. 1

• Default Setting for Incoming Call is Barred Incoming Call

• Default Setting for Speed Dial is Delay Time for 3 Seconds

Notes:

a. The default Number of times using every SIM Card is 1.

b. The default for SIM Card No. 2, SIM Card No. 3, SIM Card No. 4 is

disable and only can use SIM Card No. 1. (The system will keep

continuing using SIM Card No. 1)

c. If need to use SIM Card No. 2, it cannot directly do setting for starting

using SIM Card No. 2. It must be first setting to SIM Card No. 2 mode,

otherwise it will indicate Error.

1. Display Indicator: Signal Strength, SIM Card No. X currently in used (Display

Alternatively)

• L1-L5: Indicate the Signal Strength. L1 means Signal Very Weak. L5 means

the Signal Very Strong.

Example:

L1 as Weakest

L5 as Strongest

• S1-S4: Indicate the SIM Card No. X is currently in used. S1 means SIM Card

No. 1, S2 means SIM Card No. 2, S3 means SIM Card No. 3, S4 means SIM

Card No. 4.

Example:

S2 means SIM Card No. 2 is currently in used

DESCRIPTION FOR PANEL INDICATOR