User manual

WT-248 GSM 8 Ports Analog Gateway

WT-248 – USER MANUAL – Rev.1.5 – Technical Support: technical@witura.com

• *2*1XXX#: Indicate Number of times using SIM Card No. 1. XX=001-999

• *2*2XXX#: Indicate Number of times using SIM Card No. 2. XX=001-999

• *2*3XXX#: Indicate Number of times using SIM Card No. 3. XX=001-999

• *2*4XXX#: Indicate Number of times using SIM Card No. 4. XX=001-999

Example:

*2*1008# means the number of times using SIM Card No. 1 is 8 times

*2*3125# means the number of times using SIM Card No. 3 is 125 times

• *3*1X#: Indicate whether SIM Card No. 1 enable or disable.

X=0 means enable, X=1 means disable.

• *3*2X#: Indicate whether SIM Card No. 2 enable or disable.

X=0 means enable, X=1 means disable.

• *3*3X#: Indicate whether SIM Card No. 3 enable or disable.

X=0 means enable, X=1

means disable

• *3*4X#: Indicate whether SIM Card No. 4 enable or disable.

X=0 means enable, X=1 means disable.

Example:

*3*20# means SIM Card No. 2 is disabled

*3*41# means SIM Card No. 4 is enabled

Notes:

i. If the Setting for SIM Card No. X cannot be used; it will automatically skip the

SIM Card No. X when the SIM Card is routing.

ii. Auto switching when the SIM Card is routing.

iii. If only required using ONE SIM Card, it should be setting to disable for the

rest of the 3 SIM Card. At the same time, set this SIM Card to enable, and

start to use from this SIM Card.

iv. If using TWO SIM Card is enable (if the number of times using did not set,

every SIM Card only will use ONE time), system will automatically go into the

routing mode.

v. The default is using SIM Card No. 1.

3. Incoming Call Setting

• *4X#: Setting for Barring Incoming Call. X=0 means

Barred Incoming Call.

X=1 means Allowed Incoming Call.

Example:

*40# means Barred Incoming Call

*41# means Allowed Incoming Call