User manual

GSM VOIP Gateway Series

GSM VOIP Gateway USER MANUAL – Rev1 – Technical Support: technical@witura.com

Note: Some of parameters of the gateway wil l not be valid until the gateway is

restarted. Therefore, you are advised to restart the gateway after the parameters

are modified, so that the modification can take effect.

When the new setting is not saved, you can clear all the unsaved parameters.

Select Menu > Tool. The following page is displayed.

Warning! Only experienced users and administrators can implement the online

upgrading.

Select Tool > Online Upgrading. The online upgrading page is displayed, as shown

in the following figure. Enter the complete name and path of the upgrade package,

such as http://118.142.51.162/update/GHS-4.01-12.pkg, and then click “Start”.

The gateway begins to upgrade. After the GSM VOIP Gateway is successfully

upgraded, the gateway will automatically restart.

3.12 Abandon the change

3.13 Tool

3.13.1 Online Upgrading

GSM VOIP Gateway Series

GSM VOIP Gateway

USER MANUAL –

Rev1

–

Technical Support: technical@witura.com

1) LAN - The network input port that is connected to the router, Modem, and

switch

2) PC - The network output port that is connected to network sharing

equipment (less than 100 terminals)

3) DC4.5V/2ADC - The output terminal that connects the transformer

equipped with delivery

4) Reset - The reset switch for quick restart of the GSM VOIP Gateway

The GSM VOIP Gateway has 1/8 SIM card slots, an LAN port, and a PC port.

The install ation procedure is as follows:

1. Open the bottom cover of the GSM VOIP Gateway and insert an SIM card

of the local GSM network

2. Connect the LAN port with the upper-layer network equipment with the

Ethernet cable

Installation

2.1 Installation Procedure