User manual

14
GSM VOIP Gateway Series
GSM VOIP Gateway USER MANUAL – Rev1 – Technical Support: [e-mail]
COPYRIGHT ©2011 WITURA CORPORATION SDN BHD
It displays the current IP address of the LAN port, such as 192.168.2.172.
It displays the current IP address of the PC port.
It displays the PPPoE broadband connection condit ion. After the connection, the
IP address obtained is displayed on the LAN port.
It displays the current gateway address.
It displays the current DNS address.
Click “User Options” and the following figure shows.
User Options of the WT-2201
A. LAN Port
B. PC Port
C. PPPoE Dialing
D. Default Route
E. Domain Name Server (DNS)
3.3 User Options
63
GSM VOIP Gateway Series
GSM VOIP Gateway USER MANUAL – Rev1 – Technical Support: [e-mail]
COPYRIGHT ©2011 WITURA CORPORATION SDN BHD
Examples of SMS Dialing:
In the following SMS dialing examples, the H.323 number of the GSM VOIP
Gateway is set as follows:
Mode 2:
When a short message of “8675588228822” is sent from the mobile phone
number ([phone] to the GSM VOIP Gateway, the GSM VOIP Gateway
will send the following call requests. When the GSM VOIP Gateway sends a call
request through the H.323 number of the GSM VOIP Gateway, the GSM VOIP
Gateway will automatically add the number of the short message sender to the
PSTN Forwarding Number in Call Forwarding (VoIP Incoming Call , Forwarding to
the PSTN Immediately);
In this mode, when the GSM VOIP Gateway receives the call from the H.323 GK,
the GSM VOIP Gateway will forward the call to the short message sending
equipment through the GSM network.
The call request signaling in this mode is as follows:
Send RAS Message: admissionRequest
admissionRequest {
requestSeqNum = 241