User manual

64
GSM VOIP Gateway Series
GSM VOIP Gateway USER MANUAL – Rev1 – Technical Support: [e-mail]
COPYRIGHT ©2011 WITURA CORPORATION SDN BHD
callType = pointToPoint NULL
endpointIdentifier = "3705_endp"
destinationInfo = 1 elements {
[0] = dialedDigits "8675588228822"
}
srcInfo = 2 elements {
[0] = dialedDigits "20001"
[1] = h323-ID "20001"
}
srcCallSgnalAddress = ipAddress {
ip = 4 octets {
c0 a8 02 ed ....
}
port = 2049
}
bandWidth = 2048
callReferenceValue = 7502
conferenceID = 16 octets {
7f f3 78 77 49 3f 4c c1 9a dc 6a 84 12 d8 30 8f ..xwI?L...j...0.
}
13
GSM VOIP Gateway Series
GSM VOIP Gateway USER MANUAL – Rev1 – Technical Support: [e-mail]
COPYRIGHT ©2011 WITURA CORPORATION SDN BHD
You can also access the setting page of the GSM VOIP Gateway through the IP
address 192.168.2.216 or 192.168.2.172 of the LAN port of the gateway. The
login method is the same as that of the PC port, but you must first obtain the IP
address of the LAN port.
The status page contains the following contents, as shown in the above figure
Each GSM VOIP Gateway has a factory set sequence number, such as
GOIP08030031, which is used for centralized setting, technical support, and
maintenance filing. The sequence number is printed on the bottom plate of the
gateway and is read-only.
It displays the current version of software used by the GSM VOIP Gateway. When
you want to upgrade the software, make sure the update version is newer than the
current version.
It displays the current hardware version of the gateway.
It displays the login status of the line. When the line has logged into the SIP server
or H.323 Gatekeeper, LOGIN is displayed, otherwise, LOGOUT is displayed.
It displays the use status of the line. When the line is in use, the status is ACTIVE,
when the line is idle, the status is IDLE.
3.2.2 Network Information
D. Line Register Status
3.2 Status
3.2.1 Telephone Information
C. Hardware Version
A. Product Sequence Number
B. Software Version
E. Line Use Status