User manual

8
WT
-
1018
C1
USER MANUAL
WT-1018C1 – USER MANUAL – Rev 1.5 – Technical Support: [e-mail]
COPYRIGHT ©2009 WITURA CORPORATION SDN BHD
COMPARE INPUT
PIN: OK
Now the PIN code of the terminal has setup successfully.
Quit the programming mode by simply hook-on the phone or press the “hand-free”
Turn off the terminal and install the SIM card. Turn on the terminal again. This time
the terminal will check and match the PIN code of the SIM card as shown below.
LOADING:>>>
WAITING…
OK
WARNING CHECK
PIN : 1
If the PIN code is matched, then it will proceed to standby mode
WT-1018
Note: There are only 3 attempts for matching the PIN code with the SIM card. If the
PIN code of the SIM card is incorrect and cannot match with the PIN code of the
terminal, it will display as below
NOT THE APPOINT
SIMCARD
First attempt