User manual

1018

USER MANUAL

WT-1018C1 – USER MANUAL – Rev 1.5 – Technical Support: Technical@witura.com

WITURA CORPORATION SDN BHD

 Adopt advanced microprocessor controlling circuit, run steadily. Capability is

ascendant

 Adopt high gains antenna. Signal is strong

 Be applicable for GSM900MHz/DCS1800MHz/PCS 1900MHz

 Call or called function can be set up flexibly

 The functions of locking terminal and locking SIM card can be set up conveniently.

 Function of displaying incoming calls.

 Provide accurate anti-polarity signal for billing equipment to charge.

 This terminal should not be used at garage, oil storage and chemical plant or near

to flammable or explosive substance.

 This terminal should be avoided in the hospital. It will interfere medical electronic

equipments such as pacemaker and audiphones. This terminal could only be used

indoors.

 If it is found that the terminal is not successful in login onto the network, please

check whether the SIM card and antenna are installed well or not.

 It is forbidden to touch the antenna when the connected telephone is being used.

(Making calls or receiving calls), otherwise the terminal will be damaged. This kind

of damage is beyond the range of warranty.

 When the terminal is using, it should be placed where the signal of network is

strong enough. In order to ensure the quality of call voice, the terminal should be

far from other electronic equipment.

 The terminal does not identify SIM card of 5V and 1.8V, only identify 3V SIM card.

 Don’t disassemble the terminal by yourself. If there is any problem, please contract

the authorized personnel.

 Working voltage of wireless terminal: 12V.

 Terminal that is packed or not should piled up no more than 10 layers.

 The terminal should be saved in the ventilative and dry place.

1. Main Features of WT-1018C1

2. Caution

3. Storage