User manual

21
WT
-
1018
C1
USER MANUAL
WT-1018C1 – USER MANUAL – Rev 1.5 – Technical Support: [e-mail]
COPYRIGHT ©2009 WITURA CORPORATION SDN BHD
To check the programmed PIN code, you can press *9* to proceed.
The PIN code will be displayed on screen
Press # to turn back
To adjust the speaker and microphone volume, you can press *12* to proceed.
Example: To set the speaker volume and microphone volume to 3
Simply input 33 and ended with #
Note: The speaker volume values range from 1 – 9 (Default: 9)
The microphone volume values range from 1 – 9 (Default: 1)
To reset the WT-1018 terminal, you can press *13* to proceed.
THE PIN NUMBER
IS: 1234
SPK: MIC:
SPK: 3 MIC: 3
OK
REST
ON&&OFF:
REST
ON&&OFF: 1
Miscellaneous Settings
Inquire the Programmed PIN Code of the WT-1018 Terminal
Adjusting the Speaker and Microphone volume of the WT-1018 Terminal
Reset the WT-1018 Terminal