User manual

15
WT
-
1018
C1
USER MANUAL
WT-1018C1 – USER MANUAL – Rev 1.5 – Technical Support: [e-mail]
COPYRIGHT ©2009 WITURA CORPORATION SDN BHD
Example: To set the delay time for 3 seconds
Simply input 03 and ended with #
Note: The delay time value range from 00 –59 seconds (Default: 20 seconds)
To switch the dialing number *, 0 or 00 to GSM, you can press *7* to proceed.
Example: To activate * to dial through GSM when pressed
Simply input 100#
To set the delay time of sending the destination number after dialing the IP or
Gateway number, you can press *6* to proceed.
DTTRANSMIT:
03 OK
*: 0: 00:
*: 1 0: 0 00: 0
*: 1 0: 0 00: 0
OK
IP DELAY TIME:
IP DELAY TIME:
06
Step 4: Setting the Function of switching the dialed number to GSM
Step 5: Setting the Delay Time of Sending the Destination Number after Dialing
the IP or Gateway number