Specifications

82 Part #: 90309
BODY GUIDE WEAR PLATES REPLACEMENT
To replace body guide wear plates:
1. Remove the packer (refer to “Packer Removal Procedure”
on page 84).
2. Retract the packer cylinders and move them out of the
way.
3. Remove body wear plates by grinding or cutting the stitch
welds attaching plates to guide.
4. Clean surfaces and install new plates by tacking them in
place.
5. Once in proper position, stitch weld plates in place.
DANGER
APPLY THE LOCKOUT/TAGOUT PROCEDURE AT ALL TIMES. FAILURE
TO
DO SO MAY RESULT IN SEVERE INJURY OR DEATH.