Installation and Operating Instructions

Product description / Technical data
Fig. 2:flinkey CAN bottom side (example)
The box uses two camshaft-driven drag levers that can operate the key buttons for locking
or unlocking the vehicle via central locking This makes it possible to implement different
forms of key transfer, according to the functionality of the vehicle (steering wheel lock vs
keyless start).
The combination of the key receptacle (key bed) and the two towing levers must be adapted
to the shape of the vehicle key.
NOTICE
A later adaptation of the flinkey CAN is impossible due to the secure installation
Supported key variants can be requested by WITTE digital.
The key bed has an LED backlight, this serves as a comfort function and as status
feedback.
Fig. 3:flinkey CAN drawer with keybed (example)
During operation, the flinkey CAN receives well-defined commands in a protocol and
performs corresponding operations. This communication is wired (4 wires, +; -; 2 x data) and
corresponds to the CAN-BUS standard. (see chapter 5).