Installation and Operating Instructions

Installation
6 Installation
WARNING
Risk of injury!
Read all safety information in the chapter Safety Information before
installing the product.
WARNING
The flinkey CAN is pre-assembled by the manufacturer for a
specific keyfob type. This settings couldn’t be adjusted after the box
left the manufacturer’s factory. The box can’t be opened without
destroying it.
WARNING
Risk of injury!
Installation and maintenance work as well as functional checks of the
product must be performed by skilled personnel who, based on their
training, are appropriately qualified for this work. All local regulations
must be followed.
6.1 Unpacking
NOTICE
Check the product for any heavy damage before installation. If there is any visible
damage, a strong odor, or excessive overheating of components, unplug all the
connections immediately and stop using the system.
Make sure the packaging contains the following items:
• flinkey CAN
• Hook-and-loop fastener (2x3 strips)
• Quick Start Guide
• Cable (optional, depending on partner)
6.2 Installation instructions KPC (Optional)
NOTICE
The KPC adapter can only be used for suitable keyfobs.
The following steps must be followed during assembly:
1. The keyfob is to be opened in accordance with to the manufacturer's instructions.