Installation and Operating Instructions

Interface
5 Interface
5.1 CAN Interface
Main Connector pinout
Pin 1
Ground (negative)
Pin 2
Supply voltage (positive)
Pin 3
CAN-L (CAN bus low pin)
Pin 4
CAN_H (CAN Bus high pin)
Pin 5
Reserved
Pin 6
Reserved
Note: Pin number marking clearly visible inside receptable-
CAN bus
Description
Not galvanically isolated, referred to ground (pin1)
Data rate
Up to 5Mbit/s
Features
CAN FD, bus wake-up
5.2 Bluetooth
Specification
BLE 5.1
Operating frequencies
2.4 GHz
Compatibility
Bluetooth low energy 5.1 and earlier LE specifications
BLE antenna type
Integrated
BLE antenna gain
2.11 dBi
BLE frequency range
2400 to 2483.5 MHz
BLE maximum output power
1 dBm
BLE modulation type
Coded, GFSK
BLE data rate
Up to 2 Mbit/s
5.3 NFC interface
Operating frequency
13.56 MHz
Possible operating modes
R/W ISO/IEC 144443A/MIFARE and Feli scheme
R/W ISO/IEC 144443B
Antenna location
Inside the drawer, below the key fob, above fuel card