Data Sheet

MANUAL flinkey CAN Box

20220609 1/3

Intended use

The flinkey CAN Box is a smart actuator whose task is to lock or unlock a motor

vehicle after receiving a corresponding command. Locking or unlocking takes

place by electromechanically operating the original, unmodified vehicle key.

Technical Data

 Technical Data Sheet

Connector: TE-1418888-5

12 VDC, 3 A

Assembly

Better: Drawing with open enclosure/ drawer

The vehicle key is positioned in the box via a type-specific key bed, which is

accessible via a drawer.

Above the key bed, an electromechanical device is installed in the box, which,

driven by a camshaft, actuates the buttons for locking and unlocking by drag

levers. Furthermore, the flinkey CAN Box provides both a BLE and NFC gateway,

which can then be used exclusively by the partner device as an additional

communication interface. There is also a RF sniffer integrated.

PAGE 1
MANUAL flinkey CAN Box Intended use The flinkey CAN Box is a smart actuator whose task is to lock or unlock a motor vehicle after receiving a corresponding command. Locking or unlocking takes place by electromechanically operating the original, unmodified vehicle key. Technical Data  Technical Data Sheet Connector: TE-1418888-5 12 VDC, 3 A Assembly Better: Drawing with open enclosure/ drawer The vehicle key is positioned in the box via a type-specific key bed, which is accessible via a drawer.
PAGE 2
MANUAL flinkey CAN Box Function Without a partner device, the flinkey CAN Box has no function; without a connected partner device, both the logic and the power supply are missing. The corresponding commands must be defined with the respective partner and integrated into the firmware of the flinkey CAN Box. The commands are sent via a well-defined wired communication (CAN communication using four wires - plus and minus line, as well as two communication lines).
PAGE 3
MANUAL flinkey CAN Box Disposal Unless a take-back or disposal agreement has been made, recycle dismantled components:  Scrap metals.  Send plastic components for recycling.  Dispose of remaining components sorted according to material composition.