User Manual

ManualsBrandsWITMOTION ManualsAcceleration SensorsHigh-Stability Acceleration+Gyro+Angle (XY 0.05° Accuracy)+Digital Compass, Triaxial MPU9250 Gyroscope Sensorfor Arduino, Raspberry Pi

Table Of Contents

WT901C RS232| manual v0707 | http://wiki.wit-motion.com/english

- 31 -

2.4.9 Restore Factory Setting

Operation method:

Connect the WT901C module and the computer through the USB-TTL module,

click the setting tab, and click to restore the default. After restoring the factory

settings, power on the module again. (This method needs to know the baud

rate of the module in advance, if the baud rate does not match the instruction

will not take effect, please try to use the short circuit method to recover)