Specification Sheet
Table Of Contents
- Tutorial Link
- Contact
- Application
- Contents
- 2 Features
- 3 Specification
- 5 Casing Specification
- 6 Communication Protocol
- 6.1 Output Data Format
- 6.2 Config Commands
- 6.2.1 Register Address
- 6.2.2 Save Configuration
- 6.2.3 Calibrate
- 6.2.4 Installation Direction
- 6.2.5 Sleep/ Wake up
- 6.2.6 Algorithm Transition
- 6.2.7 Gyroscope Automatic Calibration
- 6.2.8 Return Content
- 6.2.9 Return Rate
- 6.2.10 Baud Rate
- 6.2.11 Set X Axis Acceleration Bias
- 6.2.12 Set Y Axis Acceleration Bias
- 6.2.13 Set Z Axis Acceleration Bias
- 6. 2.14 Set X Axis Angular Velocity Bias
- 6.2.15 Set Y Axis Angular Velocity Bias
- 5.2.16 Set Z Axis Angular Velocity Bias
- 6.2.17 Set X Axis Magnetic Bias
- 6.2.18 Set Y Axis Magnetic Bias
- 6.2.19 Set Z Axis Magnetic Bias
WT901SDCL | Datasheet v20-0605 | http://wiki.wit-motion.com/english
- 6 -
2 Features
The default baud rate of this device is 9600 and could be changed.
The interface of this product only leads to a serial port
The module consists of a high precision gyroscope, accelerometer,
geomagnetic field and barometer sensor. The product can solve the current
real-time motion posture of the module quickly by using the
high-performance microprocessor, advanced dynamic solutions and
Kalman filter algorithm.
The advanced digital filtering technology of this product can effectively
reduce the measurement noise and improve the measurement accuracy.
Maximum 200Hz data output rate. Output content can be arbitrarily
selected, the output speed 0.2HZ~ 200HZ adjustable.