User Manual

PNI Sensor Corporation Doc 1017252 r04
RM3100 & RM2100 Sensor Suite User Manual Page 44 of 45
Revision Control Block
Revision
Description of Change
Effective Date
Approval
R03
Added Revision Control Block. On Figures 4-1 and 4-2,
changed pins 2 and 20 to “RES” from “GND”, and changed
Table 4-1 appropriately. In Section 4.2.3, indicated the
MagI2C should be within 10 cm of the sensor coils, not 0.5 m.
A.Leuzinger
r04
Correction to cycle count command example
6/5/15
DMcKenzie