Specification Sheet
Table Of Contents
- Tutorial Link
- Contact
- Application
- Contents
- 1 Overview
- 2 Features
- 3 Specification
- 5 Communication Protocol
- 5.1 Output Data Format
- 5.2 Config Commands
- 5.2.1 Register Address
- 5.2.2 Save Configuration
- 5.2.3 Calibrate
- 5.2.4 Installation Direction
- 5.2.5 Sleep/ Wake up
- 5.2.6 Algorithm Transition
- 5.2.7 Gyroscope Automatic Calibration
- 5.2.8 Return Content
- 5.2.9 Return Rate
- 5.2.10 Baud Rate
- 5.2.11 Set X Axis Acceleration Bias
- 5.2.12 Set Y Axis Acceleration Bias
- 5.2.13 Set Z Axis Acceleration Bias
- 5.2.14 Set X Axis Angular Velocity Bias
- 5.2.15 Set Y Axis Angular Velocity Bias
- 5.2.16 Set Z Axis Angular Velocity Bias
- 5.2.17 Set X Axis Magnetic Bias
- 5.2.18 Set Y Axis Magnetic Bias
- 5.2.19 Set Z Axis Magnetic Bias
- 5.2.20 Set GPS baud
WTGAHRS2 | Datasheet v20-0523 | http://wiki.wit-motion.com/english
- 4 -
5.2.16 Set Z Axis Angular Velocity Bias
....................................................
- 26 -
5.2.17 Set X Axis Magnetic Bias
...................................................................
- 27 -
5.2.18 Set Y Axis Magnetic Bias
...................................................................
- 27 -
5.2.19 Set Z Axis Magnetic Bias
...................................................................
- 27 -
5.2.20 Set GPS baud
.........................................................................................
- 28 -