User Manual

ManualsBrandsWITMOTION ManualsAcceleration SensorsWT901 High-Accuracy Acceleration+Gyroscope+Angle +Magnetometer with Kalman Filtering, Triaxial MPU9250 AHRS IMU (IIC/TTL, 200Hz), for PC/Android/Arduino

Table Of Contents

WT901 | manual v0513 | http://wiki.wit-motion.com/english

- 15 -

Step 4. Click “Complete Calibration”

Step 5. Judge the result--confirm if there is 1g on Z-axis acceleration

After 1 ~ 2 seconds, the three axial acceleration value of the module is about

0, 0,1, the X and Y axis Angle is around 0°. After calibration, the x-y axis Angle

is accurate.

Note: When putting the module horizontal, there is 1g of gravitational

acceleration on the Z-axis.