User Manual

ManualsBrandsWITMOTION ManualsAcceleration SensorsHWT905-TTL MPU-9250 9-axis Gyroscope+Angle(XY 0.05° Accuracy)+Digital Compass with Kalman Filter, Temperature&Magnetometer Compensation, IP67 Waterproof

Table Of Contents

HWT905 TTL | manual v0707 | http://wiki.wit-motion.com/english

- 31 -

2.4.9 Restore Factory Setting

Operation method:

Connect the HWT905 to the computer through the USB to serial port module,

click the configuration option, open the configuration bar, and click "Reset".

After restoring the factory settings, power on the module again. (This method

needs to know the baud rate of the module in advance, if the baud rate does not

match the instruction will not take effect.)