GPS Operation & Installation Guide Australia’s Most Advanced Anti-Theft System for Caravans and Trailers
GPS Operation and Activation Guide GPS Tracking is available as an optional upgrade to WiTi Anti-Theft. The WiTi GPS hardware is simply plugged into the 4 pin and 2 pin corresponding plugs on the WiTi wiring harness. Ignore the two orange wires, those are not connected. WiTi GPS is supplied with a SIM and does not require connection to a third party network provider. The WiTi GPS is network independent and will operate wherever mobile phone signal is available irrespective of service provider.
These alerts can be switched on/off in the WiTi GPS App if they are not required. We recommend switching on the Geofence if the caravan / trailer is being stored or will not be moved for a while. Otherwise leave it off as it will charge a credit if it is outside the Geofence area, this could use up credits very quickly. Odometer readings are included as WiTi GPS automatically updates the location and distance travelled when updating the location.
GPS Activation Guide GPS ACTIVATION GUIDE Step 1: Go to www.witi.com.au Step 1: Go to www.witi.com.au Step 2: Click the GPS Activation menu item Step 2: Click the GPS Activation menu item Step 3: Click “New Customer” Step 3: Click “New Customer” For the asset type leave the WiTi logo selected. This will ensure the default settings for WiTi GPS are installed on your device. For solution type please select either WiTi Qprotect or WiTi Track depending upon the service required.
Device Specification • 3G WCDMA Band • ¶ GPRS(500mA); ¶ B2 ¶ WCDMA(700mA); ¶ B5 ¶ B8 • ¶ TDD (B40) Voltage range ¶ 9-72V • ¶ LTE(800mA) • 4G Lte Band ¶ FDD (B1,B2,B3,B4,B5,B7,B8, B28) • Working Current ¶ B1 GPS Band Dimensions (mm) ¶ 89(L) X 37(W) X 12(H) • Net Weight ¶ 46g • Standby Current Power ¶ Off (20uA) ¶ Sleep (3mA) ¶ Idle (22mA) ¶ L1-Band 1575MHz • Working Temperature and Humidity ¶ -20°C~75°C; 20%~90% RH 5
Limited Warranty If Leisure Technologies determines that you are covered by a warranty as set in the Australian consumer law the company shall at its expense: (a) repair the product, or replace the product with a new unit (which may have used refurbished parts of similar quality); (b) ship the repaired or replaced unit back to you; (c) warrant the repaired or replaced product for a reasonable period; and/or (d) refund money paid for the product. The Company has the discretion as to which remedy applies.
• Installation of WiTi products may require consumers to have knowledge and experience using powered tools and electrical wiring. Consumers without such knowledge are to refrain from attempting any installation of WiTi products and to consult their nearest WiTi specialist or qualified Auto Electrician. • Prior to the installation of any WiTi product consumers are taken to have comprehensively read and understood the appropriate WiTi operation and installation guide included with the product.
Scan to discover more 8 witi.com.