Installation Manual

4
electric brakes on the caravan or trailer is measured and smoothed
electronically to provide a more comfortable and safer towing
experience and eliminate harsh jolting.
To adjust braking sensitivity the dial can be turned to the le to reduce
trailer braking or to the right to increase trailer braking, the LCD screen
will display the new setting as a percentage gain that will be applied.
Adjust the brakes to a level where trailer braking is felt to assist with
overall braking of the tow vehicle and caravan. Dierent trailer weights
and driving conditions will require dierent settings to provide safe
braking operation on the trailer. Experiment with the settings to
determine the ideal braking settings for your trailer or caravan.
Braking to the trailer or caravan can be applied manually by pressing the
brake controller dial. This will apply braking at the level indicated on the
LCD screen. Turn the dial to the le for less braking and to the right for
more braking. In manual mode Hill Descent Assist and Brake Smoothing
is disabled.
WiTi Communication Module Indicator Lights
There are two LEDs embedded in the WiTi Logo
on the Communication Module.
When the unit is powered LED 1 (Red) will
illuminate. When the unit is paired and linked
then LED 2 (orange) will illuminate.
Pairing a WiTi Wireless Electric Brake Controller to
the WiTi Communication Module
1. Ensure the WiTi Anti-The System is powered on and the WiTi
Communication Module is plugged in and within 10 meters of the
WiTi Wireless Brake Controller.
2. On the WiTi Communication Module press and hold the “PAIR” Button.
3. While the “PAIR” Button is still depressed, press the RESET Button
for half a second and then let go of the RESET button whilst still
depressing the “PAIR” Button.